Choosing your size at Grain de Malice online means comparing your actual measurements with a size guide ranging from 34 to 50. The problem is that most order errors do not come from the guide itself, but from poorly taken measurements or a poor judgment between two sizes depending on the garment in question.
Ensure your measurements are accurate before consulting the size guide
The classic reflex is to wrap a measuring tape around the bust, waist, and hips, then record the numbers on the Grain de Malice chart. This sequence omits a crucial step that changes everything: measure each area three times and keep the average.
You may also like : The Latest Trends and Must-Haves in Luxury to Discover This Year
A difference of two centimeters is enough to shift from one size to the next. Moreover, the position of the tape at the back, posture, and even the time of day influence the result. Keeping the same conditions from one session to another (morning, thin underwear, upright posture) reduces these variations.
A technique borrowed from pattern making helps stabilize vertical measurements: tie a non-elastic string at the natural waist, that is, at the narrowest point of the torso, before starting. This fixed reference then serves as an anchor point for the waist-hip distance or the inseam length.
See also : Tips for Identifying Clothing Inspired by the Greatest Fashion Designers
To delve deeper into how Grain de Malice sizes on Glamiz, the details of the four necessary measurements (bust, waist, hips, thigh) are described step by step.
Grain de Malice size correspondences: quick reference table
The official brand guide associates each size with ranges for bust, waist, and hip measurements. The grid below summarizes the useful references for the most commonly ordered sizes.
| GDM Size | Bust Measurement (cm) | Waist Measurement (cm) | Hip Measurement (cm) |
|---|---|---|---|
| 36 | 84 | 64 | 90 |
| 38 | 88 | 68 | 94 |
| 40 | 92 | 72 | 98 |
| 42 | 96 | 76 | 102 |
| 44 | 100 | 80 | 106 |
| 46 | 104 | 84 | 110 |
The difference between two consecutive sizes is consistent: four centimeters per size for each measurement. This constant step simplifies reading, but it masks a reality: depending on whether the garment is a fitted dress or straight pants, the priority measurement is not the same.
Dress, jeans, or top: the measurement that determines between two sizes
When your measurements fall exactly between two lines on the chart, the type of piece dictates the decision. The hip measurement takes precedence for pants or jeans, because it is the area where the fabric has no comfort margin if the size is too tight.
For a top or blouse, the bust measurement becomes the selection criterion. A blouse slightly wider at the hips poses no visual problem, whereas a bust that is too tight alters the entire silhouette.
Special case of fitted dresses
A fitted dress requires all three measurements simultaneously. If your bust measurement corresponds to a 40 and your hip measurement to a 42, favoring the larger size protects comfort without distorting the cut. Alterations at the waist cost less than a return followed by a new order.
Jeans and elastane
Grain de Malice jeans often contain a portion of elastane. This technical detail changes the game: a slightly fitted jean during the first fitting will relax after a few hours of wear. For this type of piece, sticking to the exact size on the chart (or even the smaller size if you are between two) avoids the “jean that sags” effect at the end of the day.
Fabrics and first wash: anticipating the garment’s behavior
The choice of size does not stop at the order. Natural fabrics like cotton or linen lose length after the first wash, sometimes noticeably on a 7/8 pant that becomes too short.
Pieces with a high proportion of viscose maintain their dimensions better, but they can stretch in width with wear. Identifying the composition on the product sheet before confirming the order allows for anticipating these variations.
- Majority cotton: risk of shrinkage in length, wash in cold or 30 °C before the first outing to stabilize the fiber.
- Polyester-elastane blend: little shrinkage, the size indicated in the guide remains reliable after washing.
- Viscose or lyocell: stable dimensions after washing, but the knit may loosen in width after several wears.
Checking the composition label before choosing between two sizes represents a real time saver. A cotton garment ordered exactly in your size risks becoming too short after a machine cycle, while the size above absorbs the shrinkage without appearing too large.
Limiting returns by combining measurements and fabric composition
The majority of returns on women’s ready-to-wear sites come from a mismatch between the expected size and the received size. At Grain de Malice, cross-referencing three pieces of information before clicking reduces this risk: your averaged measurements, the type of garment ordered, and the fabric composition.
A cotton pant between two sizes should be ordered in the larger size. A stretch jean between two sizes should be ordered in the smaller size. This cross-referencing reasoning replaces hesitation with a technical choice.
The size guide remains a starting point. The reliability of your measurements, the string tied at the natural waist, and the reading of the fabric composition on each product sheet transform this table of numbers into a truly useful decision-making tool.